Free Shipping on Most Simco-Ion Products!

Simco-ION HE Static Control Nozzle

Small profile nozzle which delivers a pinpoint stream of ionized compressed air or nitrogen. Current limited design ensures operator safety.

Simco-ION HE Static Control Nozzle

HE Static Control Nozzles are a current-limited pinpoint ionizing air source, which ensures operator and equipment safety. By limiting current at the nozzle tip, the HE nozzle can be used where contact by personnel is likely. They operate on compressed air or nitrogen and produce a high-velocity stream of static eliminating air for cleaning and static control. Ideal for preventing double pickup at the feed pile on sheet-fed presses.

Features and Benefits

  • Fast, efficient neutralization
  • Can be installed individually, in a series, or on a header bar
  • Compact size allows for a wide variety of applications

FAQ      Applications     Dimensional Drawing(23kB)


Line Voltage Requirements 120 V, 60 Hz   230 V, 50 Hz
Size (Individual Nozzle) 2 1/32 inches long by 15/32 inches diameter
Maximum Air Pressure (clean, dry air) 100 psi maximum
Air Flow (at 30 psi) 2.8 SCFM
Air Supply Connection 1/8 inch NPT on nozzle
Working Distance from substrate Up to 6 inches
Operating Temperature Limit 150° F (66° C)
Static Charge Discharge Time 0.5 seconds at 6 inches at 30 psi (5000 V to 500 V)
You must order a power supply to power the nozzles if you do not already have one. We recommendthe following models for the HE Nozzle.

Power Supply Part Number
D167Q Power Supply – 120V, 60 Hz, 7 kV, 3mA max, 2 output IPD0200
D257Q Power Supply – 230V, 50/60 Hz, 7 kV, 3mA max, 2 output IPD0220

Questions? Ready to order?  E-mail us or call C.C. Steven at 805-658-0207.

Design Your HE Nozzle

It’s easy to order HE nozzles to fit your requirements. First, decide if you want 10′, 20′, or 30′ cable on the end nozzle (the end nozzle is what you use for single nozzle applications, or it is the last nozzle of a series of nozzles on one cable).

Next, decide how many, if any, “cable-thru” nozzles you want to attach to the end nozzle selected in Step 1 (cable-thru nozzles do not come with a high voltage cable, but easily clip onto the end nozzle’s cable, giving you nozzles in a series.)

Finally, decide if you want stopcocks (on/off valves to control airflow) on the individual nozzles.

Then  E-mail us or call C.C. Steven at 805-658-0207 and we’ll get them to you!

Check our Demonstrator Page for super deals (50% or more off list) on demonstrator units we may have available.