Specification:
Shockless or Hot
|
Shockless
|
Ionization Output
|
Standard
|
Maximum speed of target material
|
1200 ft/min
|
How far from charged material can bar be mounted?
|
1 inch
|
Approved for hazardous locations
|
No
|
Intended for heavy, normal or light industrial applications
|
Normal
|
Maximum overall length
|
107 1/2 inches
|
Design Your MEB Static Bar:
It’s easy to configure and order a Simco MEB static bar to fit your requirements. They are available in in 3/4” increments starting with overall lengths from 2.5” with a single ionizing emitter pin up to 140.5” with 138” of ionizing emitter pins. All SIMCO static bars are shipped with mounting brackets, high voltage cable and a connecter to attach the cable to a SIMCO Power Supply. Standard high voltage cable length is 10-ft. Longer lengths can be made if required. Corona-free shielded cable is also available for EMI/RFI protection. We can also add a right-angle cable exit to the bar to facilitate the cable run.
Simply select the overall length of the static bar you need, determine if additional cable length is required to reach the power supply mounting location, whether EMI/RFI protection is desirable, and decide if the right-angle cable exit is wanted. Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll get on built for you!
You must order a power supply to power the static bar if you do not already have one.
We recommend the following models for the MEB Static Bar:
Power Supply
|
Part Number
|
F167 – 120V, 50/60 Hz, 7 kV, 3mA max, 2 output
|
IPF0300
|
F167S – 120V, 50/60 Hz, 7 kV, 3mA max, lighted power switch
|
IPF03S0
|
F267 – 230V, 50/60 Hz, 7 kV, 3mA max, 2 output
|
IPF0301
|
F267S – 230V, 50/60 Hz, 7 kV, 3mA max, lighted power switch
|
IPF03S1
|
N167 – 120V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch
|
IPN0519
|
N267 – 230V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch
|
IPN0515
|
N257 – 230V, 50Hz, 7 kV, 3mA max, 4 output, lighted power switch
|
IPN0516
|
D167Q – 120V, 60 Hz, 7 kV, 3mA max, 2 output, use with Corona-free Shielded Cable
|
IPD0200
|
|
