High output, very rigid bar with two parallel rows of pins. The bar’s extended range allows it to be mounted up to 6″ from the target material.
Simco-ION PSH-N Static Bars
The PSH-N is a high output, shockless static bar with two parallel rows of pins. The static bar offers maximum strength, rigidity, and ruggedness. The sag rate of the PSH-N is less than 1/2″ inches over 10 feet of bar length.
The PSH-N is popular for a wide variety of applications, and is particularly preferred for long distance applications, such as on bag machine wicketers, since the bar can be mounted up to 6″ from the target material.
FAQ Static Bar Comparison Chart Dimensional Drawing(40kB)
Specification:
| Shockless or Hot | Shockless |
| Ionization Output | High |
| Maximum speed of target material | 1,500 feet per minute |
| How far from charged material can bar be mounted? | up to 6 inches |
| Approved for hazardous locations | No |
| Intended for heavy, normal or light industrial applications | Any |
| Maximum overall length | 149 3/8 inches |
Design Your PSH-N Static Bars
It’s easy to configure and order a Simco PSH-N static bar to fit your requirements. They are available in 3/4” increments starting with overall lengths from 5.18” with a single pair of ionizing emitter pins up to 149.18” with 144” of ionizing emitter pin pairs. All SIMCO static bars are shipped with mounting brackets, high voltage cable and a connecter to attach the cable to a SIMCO Power Supply. Standard high voltage cable length is 10-ft. Longer lengths can be made if required.
Simply select the overall length of the static bar you need and determine if additional cable length is required to reach the power supply mounting location. Then E-mail us or call C.C. Steven at 805-658-0207 and we’ll have one built for you!
Check our Demonstrator Page for super deals ( 50% or more off list ) on demonstrator units we may have available.
You must order a power supply to power the static bar if you do not already have one.
We recommend the following models for the PSH-N Static Bars.
| Power Supply | Part Number |
| F167 – 120V, 50/60 Hz, 7 kV, 3mA max, 2 output | IPF0300 |
| F167S – 120V, 50/60 Hz, 7 kV, 3mA max, lighted power switch | IPF03S0 |
| F267 – 230V, 50/60 Hz, 7 kV, 3mA max, 2 output | IPF0301 |
| F267S – 230V, 50/60 Hz, 7 kV, 3mA max, lighted power switch | IPF03S1 |
| N167 – 120V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch | IPN0519 |
| N267 – 230V, 60Hz, 7 kV, 3mA max, 4 output, lighted power switch | IPN0515 |
| N257 – 230V, 50Hz, 7 kV, 3mA max, 4 output, lighted power switch | IPN0516 |
A name you can trust. Doing business since 1978!
