|
HexClam Contact Cleaning Roll System 
These 6 roll contact cleaners remove particulate from both the top and bottom of
your web’s surface. The clamshell design allows the top-half of the cleaner assembly to open and the tape-roll to slide out on a drawer. This facilitates tape
maintenance and web threading. The HexClam is available for common narrow web widths of 11”, 15”, 17”, 19” and 23”. For web widths of 30” -- 60” , see our four roll contact cleaner with the clamshell design, QuadClam.
Features:
º Quick release gudgeons for quick removal of tapes.
º Air cylinders engage & separate rolls.
º Antistatic bar and power supply for easy particulate removal
º Operator panel remotely mounted
º Speed: up to 500 fpm
º Rugged Stainless Steel/Aluminum construction with Plexiglas safety covers
Contact Cleaning
Product waste results from dust and particulate contamination on surfaces of film, paper, or other
substrates. Small particles adhere to the web surface due to static electricity, moisture, etc. These particles lower your product quality, cost you money, cause production loss and
dissatisfied customers. Vacuum systems are generally effective in removing contaminants down to approximately 20 micron in size. Simco’s Narrow Web Contact Cleaning Systems can remove
particles from 20 down to 1 micron. Using Contact Cleaning Rolls (CCRs) in a nip configuration, the CCR applies from 0.5 to 2 psi pressure on the web, squeezing out the boundary layer of air.
Performance evaluations reveal a cleaning efficiency of 97% of particles down to 10 micron in size and removal of most particles to 1 micron in size.
Dimensional Drawing
Specifications,pdf, 335kB
Additional information available at 805-658-0207.
|
